Hyde® Products
Cut cardboard, foil, paper, wallcovering and more. 1 blade included, with 13 sharp points per blade; plus built-in blade breaker. Retractable blade with 2-piece positive lock. High impact polystyrene.
Reusable dispenser with hang hole. 50 snap-off blades for HYDE® knives #42030, 42047, 42055 and most other knives requiring 18mm blades. 8 sharp points per blade.
This slim 9mm knife is specifically designed for detail work, with a precision cutting angle blade, thin sharp 9mm blade and autolock feature.
• 30° cutting angle
• 9mm blades, 8 points per blade
• Blade breaker for safely refreshing blade
• Pocket clip
• Autolock withstands 17 pounds of force without blade retracting
• All stainless steel construction
Many of these same features apply to Hyde’s new 18mm snap-off knife, whose heavy-duty screw lock makes this ideal for demanding cutting jobs.
• 44 pounds of holding force without blade retracting
• 18mm blades, 8 points per blade
• Stainless steel blade holder
• Bit hole, can be used for screwdriver
• Strap hole for carrying or storing
• Easy blade changing
• Takes 18mm replacement blades (sold in packs of 5, 10, or 50, items #42330, #42355, #42359)
This rugged retractable utility knife handles well and cuts easily through carpets, linoleum, drywall and much more. Its powerful screw lock provides maximum holding power, and 7 heavy duty points per blade offer many working hours from a single blade.
100 pounds of holding force without blade retracting
25mm blades, 7 points per blade
Sturdy rubber safety grip
Heavy-gauge, anodized steel blade holder for durability
Strap hole for carrying or storing
Spare blade storage in the handle
Easy blade changing
Takes 25mm replacement blades (sold in packs of 5, item #42360)
Lightweight, quick-load taper pre-muds drywall tape for faster installation. Easy-to-fill compound compartment holds 2 quarts. Wing nuts adjust mud flow dam. Large roll compartment holds 500-feet of standard tape. Well balanced for hours of taping. Adjustable side strap for right handed use only.
Hyde’s new FlipBit™ line was created expressly to save drywall specialists time and energy — from installation to finishing. Pros know the time-suck caused by searching for a Phillips screwdriver in the middle of a taping job. The new FlipBit™ line features three joint knives with 3, 4, and 6-inch flexible blades. Each knife includes:
Phillips #2 screw bit — angled for maximum torque when setting screws
Full-tang, rust-resistant, stainless steel blades
Solvent-resistant nylon handles — comfortable, durable, easy-to-clean.
10″ stainless steel joint knife for drywall joint taping, finishing and patching is 23% lighter than conventional taping knives. Also use as smoothing tool and wallcovering trim tool. One-piece polypropylene handle is textured and contoured. Non-rusting aluminum back.
12″ stainless steel joint knife for drywall joint taping, finishing and patching is 23% lighter than conventional taping knives. Also use as smoothing tool and wallcovering trim tool. One-piece polypropylene handle is textured and contoured. Non-rusting aluminum back.
8″ stainless steel joint knife for drywall joint taping, finishing and patching is 23% lighter than conventional taping knives. Also use as smoothing tool and wallcovering trim tool. One-piece polypropylene handle is textured and contoured. Non-rusting aluminum back.
For creating smooth, defined corner joints during drywall taping and patching. Extra-wide 4″ flexible stainless steel blades with a 103º angle flex tightly into 90º inside corners. Traditional hardwood handle.
Top-of-the-line stainless steel mud pan with watertight heli-arc welded seams resists rust and wear for frequent taping and patching work. Sharp, durable edges for wiping blades clean. Measures 4-1/4″x13-3/4″ at top, 2-5/8″x12-1/8″ at bottom, 3-1/2″ deep.
Stainless steel mud pan with spot welded seams resists rust and wear for frequent taping and patching work. Sharp, durable edges for wiping blades clean. Measures 4-1/4″x13-3/4″ at top, 2-5/8″x12-1/4″ at bottom; 3-1/2″ deep.
Top-of-the-line stainless steel mud pan with watertight heli-arc welded seams resists rust and wear for frequent taping and patching work. Sharp, durable edges for wiping blades clean. Measures 4-1/4″x15-3/4″ at top, 2-5/8″x14-1/8″ at bottom, 3-1/2″ deep.
