Hyde® Products
Large-job pull scraper with four scraping edges is ideal for all-day scraping. Heavy duty high carbon steel blade has 2 rough and 2 smooth edges. Well-balanced, angled handle provides good leverage and keeps hand away from working surface. Hammer Head® knob allows for two-handed scraping and resetting nails and screws as you work. 2-1/2″ blade can be resharpened or replaced. Scraper measures 12 1/2″. Guaranteed forever.
Extra-wide scraper with 5″ blade. Knob for two-handed scraping also has metal Hammer Head® inset for resetting nails and screws as you work. Excellent for large exterior scraping ad commercial jobs. Heavy duty high carbon steel scraper has two scraping edges that can be resharpened or replaced. Well-balanced, angled handle provides good leverage and keeps knuckles safe. Scraper measures 13-1/2″. Guaranteed forever.
Heavy duty pail opener with sharp hook cutter for removing plastic 5-gallon bucket lids and pail tops. Electrocoated 3″ scraper/spreader blade and durable nylon handle with Hammer Head® end for setting popped nails and screws. Full-tang blade. Guaranteed forever.
10″ blue steel joint knife for drywall joint taping, finishing and patching is 23% lighter than conventional taping knives. Also use as smoothing tool and wallcovering trim tool. One-piece polypropylene handle is textured and contoured. Non-rusting aluminum back.
12″ blue steel joint knife for drywall joint taping, finishing and patching is 23% lighter than conventional taping knives. Also use as smoothing tool and wallcovering trim tool. One-piece polypropylene handle is textured and contoured. Non-rusting aluminum back.
14″ blue steel joint knife for drywall joint taping, finishing and patching is 23% lighter than conventional taping knives. Also use as smoothing tool and wallcovering trim tool. One-piece polypropylene handle is textured and contoured. Non-rusting aluminum back.
6″ blue steel joint knife for drywall joint taping, finishing and patching is 23% lighter than conventional taping knives. Also use as smoothing tool and wallcovering trim tool. One-piece polypropylene handle is textured and contoured. Non-rusting aluminum back.
8″ blue steel joint knife for drywall joint taping, finishing and patching is 23% lighter than conventional taping knives. Also use as smoothing tool and wallcovering trim tool. One-piece polypropylene handle is textured and contoured. Non-rusting aluminum back.
2-1/2″ tungsten carbide blade for HYDE® scraper #10620. 2 sharp scraping edges.
2″ tungsten carbide blade for HYDE® scraper #10610. 2 sharp scraping edges.
7/8″ triangular tungsten carbide blade for HYDE® scraper #10600. 3 sharp scraping edges.
Metal frame holds a single-edge razor blade for slitting open boxes and cartons or cutting wallcovering and other materials. Blade retracts for safety. Change blade without tools. 1 blade included.
No-flip, low-profile, U-joint design provides a smooth sanding action
Easy 5 second sponge change out
Simply set the aluminum head on a sanding sponge and release the “claws” for a secure grip
Sand both sides of a drywall corner simultaneously
Comes with a 3 sided triangular sanding sponge (item #09056)
For use with item #09056
Clean and open cracks for patching. Carbon steel blade, hardwood handle, plated metal ferrule. Tool measures 6″ (152mm) overall.
Plated steel patching tool for drywall, masonry and plaster patching. Two ends: flat bell and pointed.
Cut round holes up to 16″ (406mm) in diameter in drywall material. Adjustable pivot point and English/metric calibrations in 1/8″ (5mm) graduations. Heavy duty steel construction with replaceable cutting blade.
