Hyde® Products
Two-handed push-style scraper for chiseling off coatings or flooring materials such as tile, linoleum, paint and roofing materials. Foam on the handle and a rubber striking grip provide hand protection. Die cast head with welded neck will not spin loose during use. Reversible blade for twice the life; can also be resharpened. 6″ blade also available (#19452).
Hardened high-carbon steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel plated ferrule. Trims carpet in corners, around pipes and doors. Blade measures 2-5/8″x.058″.
Hardened high-carbon steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel plated ferrule. Trims carpet in corners, around pipes and doors. Blade measures 3-1/8″x.058″.
5 heavy duty .025″ blade with rounded tips protect against accidental cuts. Fit most utility knives.
The HYDE® Molding Puller was designed to remove baseboard, trim, and other molding materials from walls without damage to those materials. Due to its heavy duty construction, this molding puller also excels at a secondary use for tile, carpet and other types of flooring removal. The patent pending HYDE® Molding Puller design has a built-in “wedge” feature on the 90-degree angle that can safely be driven between the materials. It works by spreading the applied force out along a larger surface area and gradually increasing the angle away from the wall to avoid damage.
Heavy duty steel body
Wedge for easy extraction
Built-in nail puller
Superior, no-slip handle
Hand guard
Durable finish withstands hammering
Sturdy construction — will not bend or break
Built to last a lifetime!
Super-small-profile triangular blade is perfect for scraping stair railings, small channels and other hard-to-reach areas. 3-edge 7/8” triangular carbide blade can be replaced.
This super-aggressive pull scraper adds a knob for two-handed scraping with a Hammer Head® inset for resetting popped nails and screws as you work. 2-1/2” 2-edge carbide blade can be replaced
Top-of-the-line, full-size pull scraper aggressively removes paint and other coatings. 2” 2-edge carbide blade can be replaced.
High carbon steel wire brush with scraper has a large block design (6″x1″) for large area prepping, with a tapered nose for tight access and corners where low profile or extra reach is needed. Ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion. Ergonomic handle.
High carbon steel wire brush has a large block design (6″x1″) for large area prepping, with a tapered nose for tight access and corners where low profile or extra reach is needed. Ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion. Ergonomic handle.
High carbon steel wire brush has a thin block design (5-1/2″x1″) for prepping channels or narrow areas, with tight access and corners where low profile or extra reach is needed. Ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion. Ergonomic handle.
Block-style high carbon steel brush can with or without a pole. Prep large flat surface areas by hand or mount on pole (not included) for scrubbing floor or high areas. Acme threaded. Bristle block measures 6-3/4″x2-1/2″.
High carbon steel wire brush has a small block design (3″x3/4″) and tapered nose for detailed prepping and tight access. Ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion. Ergonomic handle with finger guard to protect against rolling wire.
High carbon steel wire brush with sturdy soft-grip handle for prepping medium to large flat surfaces where maximum downward force is needed. Large block design (8″x1-1/4″) for large area prepping, with a tapered nose for tight access and corners. Ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
